Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
A500 LR Marine steel,LR A500 shipbuilding steel,LR A500 plate
Source:Xin Steel Industry Date:2014/05/22
Quenched and Tempered rolled LR A500 shipbuilding steel plate owned the highest tensile strength within 610-770 Mpa,and the minimum yield point shall be 500 Mpa.Class LR A500 indicate the low temperature impacting test shall be done under 0 centigree.Xinsteel exported 500,000 tons higher strength shipbuilding steel materials all over the world especially southeast asia.When delivery,mill quality department would mark on each shipbuilding steel plate,for LR A500 ship plate,the steel mark should be included as Mill's Logo,Sizes,Steel Grade,Heat treatment mark,Heat Number or Batch number.
Getting more information about LR A500 high strength ship plate,Contact Xinsteel Now.
Our mill test certificate shall be issued according to EN10204 type 3.1 and if need the third party inspection and stamped by them,the Mill test certificate should be issued under format EN10204 type 3.2.For LR A500 need the inspection by Lloyd’s Register ship surveyor after rolling and mill test certificate issued under EN10204 3.2.
Chemical composition of Heat analysis for Shipbuilding steel plate LR A500 (Max %):
|
C |
Si |
Mn |
P |
S |
Al |
N |
|
0.21 |
0.10-0.55 |
1.7 |
0.035 |
0.035 |
0.015-0.08 |
0.02 |
|
Ni |
V |
Ti |
Cu |
B |
Nb |
Mo |
|
|
0.04-0.10 |
0.02 |
|
0.005 |
0.02-0.05 |
|
|
Yield strength (Mpa) |
Tensile strength (Mpa) |
Steel Mark |
|
500 |
610-770 |
LR A500 |