Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
HSLA steel plate SA633 Grade E,SA633GrE,SA633 Gr.E
Source:Xin Steel Industry Date:2013/10/22
Low alloy high strength steel plate SA633 Grade E is in steel standard ASME SA633/SA633M.For the thickness above 75mm,low alloy steel plate SA633Gr.E need to be done double normalized.For steel plate SA633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel plates can reach 350mm with normalized heat treatment.The original mill test certificate shall be issued under format EN10204 3.1 or EN10204 3.2 if customer need the third party inspections.
Get an valued quotation for SA633GrE Low alloy steel plate,NOW CONTACT XINSTEEL.
Other relative low alloy steel grades under steel standard ASTM and ASME are S/A572 Grade 42 steel plate,S/A572 Grade 50 low alloy steel plate,S/A572 Grade 60 steel plate,S/A572 Grade 65 low alloy plate,S/A633 Grade A steel plate,S/A633 Grade C low alloy steel plate,S/A633 Grade D steel plate,S/A633 Grade E alloy steel plate,S/A709 Grade 36 steel plate,S/A709 Grade 50 low alloy steel plate,S/A709 Grade 50W weathering steel plate,S/A709 Grade HPS 50W low alloy steel plate,S/A709 Grade HPS 70W steel plate.En10025 low alloy steel plate s275jr,steel plate s275j0,steel plate s275j2,s355jr+n steel plate,s355j0 steel plate,s355j2 steel plate.
Chemical composition of Product analysis for SA633 Grade E low alloy steel plate (Max %)
|
Steel Grade |
The Main Elements in rolling SA633 Gr.E steel plates | |||
|
C |
Si |
Mn |
P | |
|
SA633 Gr.E |
0.22 |
0.15-0.50 |
1.15-1.50 |
0.035 |
|
S |
Alt (Min) |
V |
N | |
|
0.04 |
0.018 |
0.04-0.11 |
0.03 | |