Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
ASME SA517 Grade F pressure vessel steel plate
Source:Xin Steel Industry Date:2013/11/01
Pressure vessel steel plate ASME SA517 Grade F owned high yield strength and tensile strength.For the thickness equal and belows 65mm of High strength steel plate SA517GrF,the minimum yield strength should be above 690Mpa,thickness above 65mm,this value shall be 620Mpa.Tensile strength of high strength steel plate SA517 Grade F shall be within 795-930Mpa.The additional technical requirements can be choose for ASME SA517 Grade F by our end users,such as Simulated Post-Weld Heat Treatment of Machanical Test Coupons (PWHT),Low temperature Charp V-Notch Impacting Test and High Temperature Tension Test.
Get an valued quotation for SA517 Grade F High Strength steel plate,NOW CONTACT XINSTEEL.
Other relative high strength steel grades including ASTM A514Gr.A high strength steel plate,A514Gr.B Quenched steel plate,A514Gr.C steel plate,A514 Grade E High tension steel plate,A514 Gr.F structural steel plate,A514GrH high strength steel plate,A514Gr.J plate steel,A514 Grade K structural steel plate,A514 GR.M quenched steel plate,A514 Grade P steel plate,A514 Grade Q high strength steel plate,A514Gr.R plate steel,A514GrS steel plate,A514GrT structural steel sheet,A517Gr.A steel plate,A517GRB plate steel,A517Gr.E steel sheet,A517 Grade F hot rolled plate,A517GR.H high strength steel plate,A517GrP high strength plate steel,A517Gr.Q high tension steel plate,A517GrS plate steel.
Chemical composition of Heat analysis for SA517 Grade F quenched and tempered steel plate (Max %)
|
Steel Grade |
The Main Elements in rolling SA517Gr.F pressure vessel steel plate | ||||||
|
C |
Si |
Mn |
P |
S |
Ni |
B | |
|
SA517GrF |
0.10-0.20 |
0.15-0.35 |
0.60-1.00 |
0.035 |
0.035 |
0.70-1.00 |
0.0005-0.006 |
|
Cr |
Mo |
Cu |
Nb |
Ti |
V |
Zr | |
|
0.40-0.65 |
0.40-0.60 |
0.15-0.50 |
- |
- |
0.03-0.08 |
- | |