EnglishEspañol
ASME SA514 Grade J high strength steel plate
Source:Xin Steel Industry   Date:2013/10/30

High strength steel plate SA514 Grade J shall be heat treated by steel mills to conform to the tensile and hardness requirements by heating to not less than 1650 F (900 centigrade),quenching in water or oil and tempering at not less than 1150 F (620 centigrade).The heat treating temperature shall be reported on the mill test certificates. When delivery steel materials ASME SA514Gr.J,steel mill would issued the original mill test certificate,also short as MTC which report the values of main chemical composition,mechanical property,all test result when rolling of steel SA514 Grade J.


Get an valued quotation for SA514 Grade J High Strength steel plate,NOW CONTACT XINSTEEL.


Other relative high strength steel grades including ASTM A514Gr.A high strength steel plate,A514Gr.B Quenched steel plate,A514Gr.C steel plate,A514 Grade E High tension steel plate,A514 Gr.F structural steel plate,A514GrH high strength steel plate,A514Gr.J plate steel,A514 Grade K structural steel plate,A514 GR.M quenched steel plate,A514 Grade P steel plate,A514 Grade Q high strength steel plate,A514Gr.R plate steel,A514GrS steel plate,A514GrT structural steel sheet,A517Gr.A steel plate,A517GRB plate steel,A517Gr.E steel sheet,A517 Grade F hot rolled plate,A517GR.H high strength steel plate,A517GrP high strength plate steel,A517Gr.Q high tension steel plate,A517GrS plate steel.


Chemical composition of Heat analysis for SA514 Grade J quenched and tempered steel plate (Max %)

 

Steel Grade

The Main Elements in rolling SA514Gr.J high strength steel plate

C

Si

Mn

P

S

N

B

SA514GrJ

0.12-0.21

0.20-0.35

0.45-0.70

0.035

0.035

-

0.001-0.005

Cr

Mo

Cu

Nb

Ni

Ti

V

Zr

-

0.50-0.65

-

-

-

-

-

-