Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
EN 10025-6 S460QL1 high tension strength steel plate
Source:Xin Steel Industry Date:2013/05/03
High yield strength steel plate S460QL1 under EN 10025-6 owned the minimum yield strength at 460 Mpa and tensile strength within 550-720 Mpa.The necessary technical requirement when rolling steel plate S460QL1 contains quenching and tempering heat treatment,low temperature impacting test under minus 60 centigrade.The additional technical has Ultrasonic examination.Xinsteel roll structural steel plate S460QL1 completely under steel standard EN 10025-6 and would issue the original mill test certificate under format EN 10204 3.1.
Get an valued quotation for S460QL1 High Strength steel plate,NOW CONTACT XINSTEEL.
Other relative high strength steel grades including EN 10025-6 S460Q high strength steel plate,S460QL Quenched steel plate,S460QL1 steel plate,S500Q hot rolled steel plate,S500QL structural steel plate,S500QL1 high strength steel plate,S550Q plate steel,S550QL structural steel plate,S550QL1 quenched steel plate,S620Q steel plate,S620QL high strength steel plate,S620QL1 plate steel,S690Q steel plate,S690QL structural steel sheet,S690QL1 steel plate,S890Q plate steel,S890QL steel sheet,S890QL1 hot rolled plate,S960Q high strength steel plate,S960QL high strength plate steel.
Chemical composition of Heat analysis for S460QL1 quenched and tempered steel plate (Max %)
|
Steel Grade |
The Main Elements in rolling S460QL1 high strength steel plate | |||||||
|
C |
Si |
Mn |
P |
S |
N |
B | ||
|
S460QL1 |
0.20 |
0.80 |
1.70 |
0.020 |
0.010 |
0.015 |
0.0050 | |
|
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
Zr | |
|
1.50 |
0.50 |
0.70 |
0.06 |
2.0 |
0.05 |
0.12 |
0.15 | |