Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
EN 10025-6 grade S460QL steel plate and S460QL1 steel plate
Source:Xin Steel Industry Date:2021/08/30
Quenched and tempered low temperature steel materials EN 10025-6 grade S460QL steel plate and S460QL1 steel plate owns higher yield strength and tensile strength.According to EN 10027-2 specification,S460QL also called as 1.8906,S460QL1 called as 1.8916.For thickness equal and belows 50 millimeter,maximum CEV in % for S460QL and S460QL1 shall not be above 0.47%.
S460QL steel plate done charp V-notch impact test at low temperature -40 ℃ with minimum values of impact energy in 30J on longitudinal.S460QL1 steel plate done charp V-notch impact test at low temperature -60 ℃ with minimum values of impact energy in 30J on longitudinal.S460QL1 steel plate equal to GB/T 16270 Q460F steel plate and S460QL steel plate equal to Q460E steel plate.
EN 10025-6 specification S460QL steel plate and S460QL1 steel plate in chemical composition and mechanical property:
|
S460QL and S460QL1 |
Chemical composition: Heat Analysis Max% | |||||||||||||
|
Standard |
Grade |
C |
Mn |
P |
S |
Si |
Cu |
Cr |
Ni |
Mo |
B |
V |
Nb |
Ti |
|
EN 10025-6 |
S460QL |
0.2 |
1.7 |
0.020 |
0.010 |
0.8 |
0.5 |
1.5 |
2.0 |
0.7 |
0.005 |
0.12 |
0.06 |
0.05 |
|
EN 10025-6 |
S460QL1 |
0.2 |
1.7 |
0.020 |
0.010 |
0.8 |
0.5 |
1.5 |
2.0 |
0.7 |
0.005 |
0.12 |
0.06 |
0.05 |
|
Mechanical Properties: |
Thickness |
Yield strength |
Tensile strength | |||||||||||
|
Mpa Min. |
Mpa | |||||||||||||
|
EN 10025-6 |
S460QL |
T≤50 |
460 |
550-720 | ||||||||||
|
EN 10025-6 |
S460QL1 |
T≤50 |
460 |
550-720 | ||||||||||