

S355JR+AR hem beam and S355J2+N hem beam high tensile steel materials supplying comply to european steel specification EN 10025-2.Owned minimum yield strength 355Mpa,S355JR+AR HEM beam and S355J2+N HEAM beam can be used in high tensile strength structural steel frames.S355JR+AR HEM beam normally used in room temperature,but S355J2+N hem beam can used in -20 Deg.Centigrade temperature surroudings.N means normalized heat treatment shall be done for S355J2+N hem beams.If without Normalized treatment,it have to be as steel grade S355J2 HEM beam or S355J2+AR HEM beam.
Many dimension ham beam steel materials are in our stock ready for shipment including
HEM260 H290*268*18*32.5 HEM280 H310*288*18.5*33 HEM300 H340*310*21*39
HEM320 H359*309*21*40 HEM340 H377*309*21*40 HEM360 H395*308*21*40
HEM400 H432*307*21*40 HEM450 H478*307*21*40 HEM500 H524*306*21*40
HEM550 H572*306*21*40 HEM600 H620*305*21*40 HEM650 H668*305*21*40
HEM700 H716*304*21*40
EN 10025-2 S355J2+N HEM beam and S355JR+AR HEM beam in chemical composition and mechanical property:
S355J0 and S355J2 |
Chemical composition: Heat Analysis Max% | |||||||||||
Standard |
Grade |
C |
Mn |
P |
S |
Si |
Cu |
N |
Ti |
Cr |
Ni |
Mo |
EN 10025-2 |
S355JR |
0.24 |
1.60 |
0.035 |
0.035 |
0.55 |
0.55 |
0.012 |
|
|
|
|
EN 10025-2 |
S355J2 |
0.20 |
1.60 |
0.025 |
0.025 |
0.55 |
0.55 |
|
|
|
|
|
Mechanical Properties: |
Thickness |
Yield strength |
Tensile strength | |||||||||
Mpa Min. |
Mpa | |||||||||||
EN 10025-2 |
S355JR |
T≤16 |
355 |
470-630 | ||||||||
EN 10025-2 |
S355J2 |
T≤16 |
355 |
470-630 |