Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
Normalized steel plate S355J0 EN 10025-2
Source:Xin Steel Industry Date:2013/01/22
S355J0 steel plate with normalized heat treatment,Normalized rolling in which the final deformation is carried out in a certain temperature range leading to a material condition equivalent to that obtained after normalizing so that the specified values of the mechanical properties are retained even after normalizing.So Xinsteel engineers suggest doing Normalized for heavy thick steel plate S355J0. The steel making process for low alloy steel plate S355J0 shall be in accordance with EN 10025-1. If specified at the time of the order the steel making process shall be reported to the purchaser, with the exception of steel S185.
Get an valued quotation for S355J0 Low alloy steel plate,NOW CONTACT XINSTEEL.
Other relative low alloy steel grades under steel standard DIN17100 are st44-2 steel plate,st44-3 steel plate,st52-3 steel plate,st50-2 steel plate,st60-2 steel plate,st70-2 steel plate,and under EN 10025 are S275JR steel plate,S275J0 carbon steel plate,S275J2 steel plate,S355JR steel plate,S355J0 low alloy steel plate,S355J2 steel plate,S355K2 steel plate,S450J0 steel plate,S275M steel plate,S275ML low alloy steel plate,S355M steel plate,S355ML steel plate,S420M steel plate,S420ML low alloy plate,S460M steel plate,S460ML steel plate,S275N normalized steel plate,S275NL low alloy plate steel,S355N steel plate,S355NL low alloy steel plate,S420N steel plate,S420NL steel plate,S460N plate steel,S460NL steel plate.
Chemical composition of Product analysis for S355J0 structural steel plate (Max %)
|
Thickness |
C |
Si |
Mn |
p |
S |
N |
Cu |
|
T≤16 |
0.20 |
0.55 |
1.60 |
0.03 |
0.03 |
0.012 |
0.55 |
|
16＜T≤40 |
0.20 | ||||||
|
40＜T |
0.22 |