Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
S355NL EN 10025-3 Normalised steel plate
Source:Xin Steel Industry Date:2013/02/17
Owned minimum yield strength at 355 Mpa for the thickness equal and below 16 millimeters,steel plate S355NL belongs to a higher strength steel grade in these EN 10025-3 standard.The tensile strength of S355NL shall be 470-630 Mpa for the thickness equal and below 100millimeters,Above 100mm,the range shall be within 450-600 Mpa for structural steel plate S355NL.The impacting temperature for steel plate S355NL shall be at minus 50 centigrade when rolling.
Get an valued quotation for S355NL Low alloy steel plate,NOW CONTACT XINSTEEL.
Other relative low alloy steel grades under steel standard DIN17100 areSte285 steel plate,Wste285 steel plate,Tste285 structural steel plate,Este285 steel plate,Ste315 plate steel,Wste315 steel,Tste315 steel plate,Este315 steel plate and under EN 10025 are S275JR steel plate,S275J0 carbon steel plate,S275J2 steel plate,S355JR steel plate,S355J0 low alloy steel plate,S355J2 steel plate,S355K2 steel plate,S450J0 steel plate,S275M steel plate,S275ML low alloy steel plate,S355M steel plate,S355ML steel plate,S420M steel plate,S420ML low alloy plate,S460M steel plate,S460ML steel plate,S275N normalized steel plate,S275NL low alloy plate steel,S355N steel plate,S355NL low alloy steel plate,S420N steel plate,S420NL steel plate,S460N plate steel,S460NL steel plate.
Chemical composition of Product analysis for S355NL structural steel plate (Max %)
|
Steel Grade |
The Main Elements in rolling S355NL steel plates | ||||||
|
C |
Si |
Mn |
P |
S |
Nb |
V | |
|
S355NL |
0.20 |
0.55 |
0.85-1.75 |
0.030 |
0.025 |
0.06 |
0.14 |
|
Alt min |
Ti |
Cr |
Ni |
Mo |
Cu |
N | |
|
0.015 |
0.06 |
0.35 |
0.55 |
0.13 |
0.60 |
0.017 | |