Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
EN10025 S355M,S355M steel plate
Source:Xin Steel Industry Date:2013/01/29
Structural steel plate S355M is one steel grade in steel standard en 10025-4.Comparing with steel plate S275M,S355M steel plate owned a higher steel strength including its yield strength and tensile strength.The minimum yield point of S355M steel plates is 355 Mpa,and tensile strength within 470-630 Mpa.For chemical composition,S355M low alloy steel plates contains a higher V and Ni than steel plate S275M when rolling.Xinsteel offer S355M structural steel plates range shall be thickness from 6mm-400mm,width from 1500-4000mm and length from 5000-16000mm.For special sizes or specifications,xinsteel also offer cutting and welding services.
Get an valued quotation for S355M Low alloy steel plate,NOW CONTACT XINSTEEL.
Other relative low alloy steel grades under steel standard DIN17100 are st44-2 steel plate,st44-3 steel plate,st52-3 steel plate,st50-2 steel plate,st60-2 steel plate,st70-2 steel plate,and under EN 10025 are S275JR steel plate,S275J0 carbon steel plate,S275J2 steel plate,S355JR steel plate,S355J0 low alloy steel plate,S355J2 steel plate,S355K2 steel plate,S450J0 steel plate,S275M steel plate,S275ML low alloy steel plate,S355M steel plate,S355ML steel plate,S420M steel plate,S420ML low alloy plate,S460M steel plate,S460ML steel plate,S275N normalized steel plate,S275NL low alloy plate steel,S355N steel plate,S355NL low alloy steel plate,S420N steel plate,S420NL steel plate,S460N plate steel,S460NL steel plate.
Chemical composition of Product analysis for S355M structural steel plate (Max %)
|
Steel Grade |
The Main Elements in rolling S355M steel plates | ||||||
|
C |
Si |
Mn |
P |
S |
Nb |
V | |
|
S355M |
0.16 |
0.55 |
1.70 |
0.035 |
0.030 |
0.06 |
0.12 |
|
Alt min |
Ti |
Cr |
Ni |
Mo |
Cu |
N | |
|
0.015 |
0.06 |
0.35 |
0.55 |
0.13 |
0.60 |
0.017 | |