Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
EN 10025 Structural steel material S235JR hea beam and S235J0 hea beam
Source:Steel Industry Date:2021/03/29
EN 10025-2 specification Structural steel material S235JR hea beam and S235J0 hea beam S235J2 hea beam stock in our port warehouse ready for exporting.These mild steel S235JR hea beam and S235J0 hea beam marking with steel standard,steel grades,sizes,heat number comply to original mill certificate.
The sizes for carbon structural steel material S235JR hea beam and S235J0 hea beam inculding:
HEA200 H190*200*6.5*10 HEA220 H210*220*7*11 HEA240 H230*240*7.5*12HEA260 H250*260*7.5*12.5
HEA280 H270*280*8*13 HEA300 H290*300*8.5*14HEA320 H310*300*8.5*14 HEA340 H330*300*9.5*16.5
HEA360 H350*300*10*17.5 HEA400 H390*300*11*19 HEA450 H440*300*11.5*21 HEA500 H490*300*12*23
S235JR Hea beam and S235J0 hea beam in chemical composition and mechanical property:
|
S235JR vs S235J0 |
Chemical composition: Heat Analysis Max% | |||||||
|
Standard |
Grade |
C |
Mn |
P |
S |
Si |
Cu |
N |
|
EN 10025-2 |
S235JR |
0.16 |
1.20 |
0.025 |
0.020 |
- |
0.55 |
0.012 |
|
EN 10025-2 |
S235J0 |
0.17 |
1.40 |
0.030 |
0.030 |
- |
0.55 |
0.012 |
|
Mechanical Properties: |
Thickness |
Yield strength |
Tensile strength | |||||
|
Mpa Min. |
Mpa | |||||||
|
EN 10025-2 |
S235JR |
T≤16 |
235 |
360-510 | ||||
|
EN 10025-2 |
S235J0 |
T≤16 |
235 |
360-510 | ||||