Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
P355QL1 steel plate,P355QL1 boiler steel plate
Source:Xin Steel Industry Date:2012/11/06
Under steel specification EN 10028-6,pressure vessel steel plate P355QL1 shall be done heat treatment with Quenching and Tempering.For impacting test,the deviating from EN 10028-1,the preparation of test pieces sample taken from middle thickness may be agree at the the time of inquiry and making purchasing orders.In this case,test temperatures and minimum impact energy values shall be agreed.Pressure vessel steel plate P355QL1 shall be done impacting test at minus 40 centi degree low temperature.Xinsteel warehouses stock different siezs of boiler steel plate and sheet P355QL1now.
Get an valued quotation for P355QL1 pressure vessel steel plate,NOW CONTACT XINSTEEL.
Other relative pressure vessel steel grades under steel standard EN 10028 are p275n steel plate,p275nh steel plate,p275nl1boiler steel plate,p275nl2 pressure vessel steel plate,p355n steel plate,p355nh boiler steel plate,p355nl1 pressure vessel steel plate,p355nl2 steel sheet,p460n steel plate,p460nh boiler steel plate,p460nl1 pressure vessel steel plate,p460nl2 steel plate,p265gh steel plate,p265gh boiler steel plate,p295gh steel plate,p295gh pressure vessel steel plate,p355gh steel plate,p355gh boiler steel plate,16Mo3 steel plate,16mo3 boiler steel plate.
Chemical composition of Ladle analysis for P355QL1 pressure vessel steel plate (Max %):
|
Steel Grade |
The Main Elements in rolling P355QL1 pressure vessel steel plates | ||||||
|
C |
Si |
Mn |
P |
S |
N |
B | |
|
P355QL1 |
0.16 |
0.4 |
1.5 |
0.020 |
0.010 |
0.015 |
0.005 |
|
Mo |
Cu |
Nb |
Ni |
Ti |
V |
Zr | |
|
0.25 |
0.3 |
0.05 |
0.5 |
0.03 |
0.06 |
0.05 | |