Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
KR Grade DH32,KR Grade DH32 shipbuilding steel plate,KR DH32 ship plate
Source:Xin Steel Industry Date:2012/07/31
Shipyards use shipbuilding steel plate KR Grade DH32 and Marine steel plate KR Grade DH32 to construct tanks and vessels in ships cause KR Grade DH32 ship plate owned the high yield strength and tensile strength. Xinsteel group owned tens of stock warehouses in port cities in China,there are thousands tons of shipbuilding steel plate and sheet and angles and buld flats in stock which are ready to ship on board.Different thicknesses,width mainly in 2000-2500mm,length mainly in 6000-12000mm for steel plate KR Grade DH32 and other shipbuilding steel grades.
Xinsteel's rolling range for Marine steel plate KR Grade DH32 shall be thickness from 3mm to 350mm,width from 1200mm to 4200mm and length from 5000mm to 16000mm.Our processing plants also can offer cutting and welding services for customers' special sizes demands.Our pre-treatment plants can offer shot blasting and painting for KR Grade DH32 shipbuilding steel plates and profiles before shipment,and then they can be used directly by the end users.
Chemical composition of Heat analysis for Shipbuilding steel plate KR Grade DH32 (Max %):
|
C |
Mn |
Si |
P |
S |
Al (acid) |
Nb |
|
0.18 |
0.90-1.60 |
0.50 |
0.035 |
0.035 |
≥ 0.015 |
0.02-0.05 |
|
Ti |
V |
Ni |
Cu |
Cr |
Mo |
|
|
0.02 |
0.03--0.10 |
0.40 |
0.35 |
0.20 |
0.08 |
|
Mechanical properties for Shipbuilding steel plate KR Grade DH32:
|
Yield strength (Mpa) |
Tensile strength (Mpa) |
Steel Mark |
|
315 |
440-590 |
KR/DH32/D32 |