EnglishEspañol
GL Grade D shipbuilding steel plate,GL Grade D ship plate,GL Grade D steel plate
Source:Xin Steel Industry   Date:2012/07/31

GL Grade D steel plate is common strength shipbuilding plate which is mainly used for built hull of vessels,ship body construction.Normally when rolling,Air rolled and Control Rolled is ok for ship plate GL Grade D with the thickness equal and belows 40 Millimeters,and for thickness above 40mm,the heat treatment shall be Normalised or TMCP,these two technical treatment would improve steel strength in yield and tensile points for shipbuilding steel plate GL Grade D.


Xinsteel owned tens of stock warehouses at Shanghai,Tianjin port and Zhengzhou inner city which store thousands tons of shipbuilding steel plate with many grades,such as GL Grade B,GL Grade A,GL Grade D,GL Grade E and higher ship steel grades GL Grade DH36,GL Grade EH36 and GL Grade FH32.Please send your needed sizes and steel grades to us if you demand of stock of shipbuilding steel plate.

 

Chemical composition of Heat analysis for Shipbuilding steel plate GL Grade D (Max %):

C

Si

Mn  (Min)

P

S

0.21

0.10-0.35

0.60

0.035

0.035

 

Mechanical properties for Shipbuilding steel plate GL Grade D:

Yield strength (Mpa)

Tensile strength (Mpa)

Steel Mark

235

400-520

GL/D