Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
EN 10025-2 S235J0 carbon structural steel plate
Source:Xin Steel Industry Date:2013/03/26
Common carbon structural steel plate S235J0 rolling with the minimum yield strength at 235Mpa,and the tensile strength shall be within 360-510 Mpa.Low temperature impacting test shall be done under zero centigrade for structural steel plate S235J0.Normally Controlled rolled or Air rolled for steel plate S235J0 is ok,if customer demand,normalized is better for delivery of S235J0 steel plates.Xinsteel roll S235J0 completely according to standard EN 10025-2 and issued the original mill test certificate under Type EN 10204 3.1.
Get an valued quotation for S235J0 Carbon steel plate,NOW CONTACT XINSTEEL.
Other relative common carbon structural steel in EN 10025-2 are S235JR carbon steel plate,S235J0 steel plate,S235J2 mild steel plate,Din 17100 contains St33 steel plate,St37-2 carbon steel,Ust37-2 plate steel,Rst37-2 steel plate,St37-3 mild steel plate,Din 17102 StE255 carbon structural steel plate,WstE255 steel plate,TstE255 mild steel plate,EstE255 plate steel,ASTM A36 carbon steel plate,ASTM A283 Grade A steel plate,A283 Gr.B carbon plate,A283 Gr.C steel plate,A283 Grade D mild steel plate,ASTM A573 Grade 58 steel plate,A573 Grade 65 steel plate,A573 Grade 70 steel plate,Jis g3106 SS330 carbon steel plate,SS400 mild steel plate,SS490 steel plate,SS540 structural steel plate,SM400A steel plate,SM400B plate,SM400C mild steel plate,GB/T700 Q235A steel plate,Q235B carbon steel plate,mild steel plate Q235C,Q235D and Q235E steel plate.
Chemical composition of Product analysis for S235J0 structural steel plate (Max %)
|
Thickness |
C |
Si |
Mn |
p |
S |
N |
Cu |
|
T≤16 |
0.19 |
0.60 |
1.50 |
0.040 |
0.040 |
0.014 |
0.60 |
|
16＜T≤40 | |||||||
|
40＜T |