Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
DNV Grade FH40 Marine steel,DNV Grade FH40 shipbuilding steel,DNV FH40
Source:Xin Steel Industry Date:2012/07/27
The higher steel grade DNV Grade FH40 shipbuilding steel plate are used abnormally owning to its high cost and substitutability.For shipbuilding steel plate DNV Grade FH40,the standard rolling size is width of 2000mm and length 6000mm,considering the steel plates can be loaded into the twenty feet container,we suggest the end users to accept 5800mm,it would cost much ocean freight for them when transport.International purchase sizes always follow the feet sizes,after calculation,the most demands sizes for DNV Grade FH40 ship plates are normally 2438mm*9144mm or 1829mm*6096mm.
Xinsteel are rolling thousands tons of shipbuilding plate DNV Grade FH40 with ABS agency endorsed and stamped every month,and transported to domestic shipyards to use and export to overseas shipyards to building vessels,docks,ships cranes.Welcome our vast customer to inquiry us for shipbuilding steel plates DNV Grade FH40 and get velued quotations&technical information form Xinsteel sooner.
Chemical composition of Heat analysis for Shipbuilding steel plate DNV Grade FH40 (Max %):
|
C |
Mn |
Si |
P |
S |
Al (acid) |
Nb |
|
0.16 |
0.90-1.60 |
0.50 |
0.025 |
0.025 |
≥ 0.015 |
0.02-0.05 |
|
Ti |
V |
Ni |
Cu |
Cr |
Mo |
N |
|
0.02 |
0.03--0.10 |
0.80 |
0.35 |
0.20 |
0.08 |
0.009 |
Mechanical properties for Shipbuilding steel plate DNV Grade FH40:
|
Yield strength (Mpa) |
Tensile strength (Mpa) |
Steel Mark |
|
390 |
510-650 |
NV/FH40/F40 |