EnglishEspañol
DNV F500 steel plate,NV F500 shipbuilding steel,DNV Grade F500 plate
Source:Xin Steel Industry   Date:2014/03/24

Shipbuilding steel plate DNV F500 is mainly used to make ship cranes owning to its alloy elements and high strength property.When rolling ship steel plate DNV F500,low temperature impacting test shall be done under minus 60 centigree,about the impacting energy values,the end user can indicate it in their technical requirement list.For the rolling range of DNV F500 shipbuilding steel plate,the thickness within 6mm to 300mm,width from 1500mm to 4000mm and length from 5000mm to 14000mm,for some smaller sizes,Xinsteel would like to cut the normal size steel plate into special sizes as cutomers' demands.


Getting more information about DNV F500 high strength ship plate, Contact Xinsteel Now.


The similar shipbuilding steel grade FQ51 in steel stand ABS is mainly used on offshore and oil platform project. Actually ABS FQ51 owned the same chemical composition and mechnical property as DNV Grade F500 shipbuilding steel plates.These two steel grades are in our rolling catalogs.

 

Chemical composition of Heat analysis for Shipbuilding steel plate NV F500 (Max %):

 

C

Si

Mn

P

S

Al

N

0.18

0.10-0.55

1.6

0.025

0.025

0.015-0.08

0.02

Ni

V

Ti

Cu

B

Nb

Mo

 

0.04-0.10

0.02

 

0.005

0.02-0.05

 

 

 

 

 

 

 

Mechanical properties for Shipbuilding steel plate DNV F500:

 

Yield strength (Mpa)

Tensile strength (Mpa)

Steel Mark

500

610-770

NV F500