Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
CCS Grade EH32 ship plate,CCS Grade EH32 shipbuilding steel,CCS EH32 steel plate
Source:Xin Steel Industry Date:2012/08/02
The high tensile strength in normal shipbuilding steel,CCS Grade EH32 shipbuilding steel plate is nromally used to build ships and vessels which sailed in ocean waters and the tough situiation.CCS Grade EH32 ship steel plate shall be done low temperature impacting test under minus 40 centigree when rolling.Minimum yield strength for shipbuilding steel plate CCS Grade EH32 is at 315 Mpa.
The similar shipbuilding steel grade A131 Grade EH32 in steel stand ASTM A131/A131M is mainly used on offshore and oil platform project. Actually A131 Grade EH32 owned the same chemical composition and mechnical property as CCS Grade EH32 shipbuilding steel plates.These two steel grades are in our rolling catalogs.For chemical composition of CCS Grade EH32 shipbuilding steel plate and sheet,please see the below tables:
Mechanical properties for Shipbuilding steel plate CCS Grade EH32:
|
Yield strength (Mpa) |
Tensile strength (Mpa) |
Steel Mark |
|
315 |
440-590 |
CCS/EH32/E32 |
Chemical composition of Heat analysis for Shipbuilding steel plate CCS Grade EH32 (Max %):
|
C |
Mn |
Si |
P |
S |
Al (acid) |
Nb |
|
0.18 |
0.90-1.60 |
0.50 |
0.035 |
0.035 |
≥ 0.015 |
0.02-0.05 |
|
Ti |
V |
Ni |
Cu |
Cr |
Mo |
|
|
0.02 |
0.03--0.10 |
0.40 |
0.35 |
0.20 |
0.08 |
|