Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
A709 Gr50W|A709 Gr.50W|A709-50W wind turbine steel plate
Source:Xin Steel Industry Date:2015/06/18
A709 Gr50W|A709 Gr.50W|A709-50W wind turbine steel plate
Steel Grade: ASTM A709 Grade 50W Type A/B/C
Relative steel grades:A709 Gr.36,A709 Gr.50,A709 Gr.50W,A709 Gr.HPS 70W,S355N,S355NL,S420N,S420NL,S275N,S460N,S460NL,Q345E,Q345D
Main application:Mainly for wind turbine buildings,Winder tower buildings. Xinsteel Steel Wind Energy Group uses our entire company’s steel expertise to produce to your exact specifications on every wind tower shell plate order.
Rolling range: Thickness*Width*Length 5-450mm*1500-4200mm*5000-18000mm
Surface Treatment: Coated,Shop primer painting
Test: Low temperature impacting test,Ultrasonic examination,Normalized,Quenched and Tempered,NACE,HIC,SSCC and Third party inspections by end user.
Want to get more information about Wind tower steel plate,please CONTACT XINSTEEL NOW
►Mechnical property for A709 Grade 50W Wind Turbine steel:
|
Yield strength (≥Mpa) |
Tensile strength (≥Mpa) |
Elongation in ≥,% | |
|
345 |
485 |
200mm |
50mm |
|
18 |
21 | ||
►Chemical composition for A709Gr50W Wind Turbine steel (Heat Analysis Max%)
|
Main chemical elements composition of A709Gr50W Type A | ||||||||
|
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Cu |
V |
|
0.19 |
0.30-0.65 |
0.80-1.25 |
0.04 |
0.05 |
0.40 |
0.40-0.70 |
0.25-0.40 |
0.02-0.10 |
China supplying high quality wind turbine steel A709 Gr.50w,A709-50w,A709 grade 50w wind electricity steel from mill rolling and ready stock both.