Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
ABS approved A131 Grade E shipbuilding steel plate
Source:Xin Steel Industry Date:2013/07/18
Shipbuilding steel plate ASTM A131 Grade E mainly be used in below minus 40 centigree ocean situiation. ABS A131 Grade E steel is done low temperature impacting test when rolling in our steel mill.In addition to the basic requirements of this specification for steel plate A131 Grade E,certain supplementary requirements are available whenadditional control, testing, or examination is required to meetend use requirements. These include:1 Vacuum treatment,2 Additional or special tension testing,3 Impact testing, 4 Nondestructive examination.
Get an valued quotation for A131-E platform steel plate,NOW CONTACT XINSTEEL.
The best important test for shipbuilding steel plate is Z-test,Z-test is for thickness nondestructive test for steel plate which including three different grades,such as Z15,Z25,Z35.For Grade E plates, now we can roll DNV Grade E,LR Grade E,BV Grade E,GL Grade E,NK Grade E,CCS Grade E,KR Grade E and RINA Grade E.Now we give you the mechnical properity and chemical composition for marine steel plate ABS A131 Grade E for your reference.
Chemical composition of Heat analysis for Shipbuilding steel plate A131 Grade E (Max %):
|
C |
Si |
Mn (Min) |
P |
S |
|
0.18 |
0.10-0.35 |
0.70 |
0.035 |
0.035 |
Mechanical properties for Shipbuilding steel plate A131 Grade E:
|
Yield strength (Mpa) |
Tensile strength (Mpa) |
Steel Mark |
|
235 |
400-520 |
A131-E |