Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
Oil platform steel plate ASTM A131-AH36,A131 Grade AH36
Source:Xin Steel Industry Date:2013/07/19
Shipyards use shipbuilding steel plate ASTM A131 Grade AH36 to construct tanks and vessels in ships cause A131 Grade AH36 ship plate owned the higher yield strength and tensile strength. Xinsteel group owned tens of stock warehouses in port cities in China,there are thousands tons of shipbuilding steel plate and sheet and angles and buld flats in stock which are ready to ship on board.Different thicknesses,width mainly in 2000-2500mm,length mainly in 6000-12000mm for steel plate A131 Grade AH36.
Get an valued quotation for A131-AH36 platform steel plate,NOW CONTACT XINSTEEL.
Our mill test certificate shall be issued according to EN10204 type 3.1 and if need the third party inspection and stamped by them,the Mill test certificate should be issued under format EN10204 type 3.2.For ABS A131 Grade AH36 need the inspection by ABS ship surveyor after rolling and mill test certificate issued under EN10204 3.2.
Chemical composition of Heat analysis for Shipbuilding steel plate A131 Grade AH36 (Max %):
|
C |
Mn |
Si |
P |
S |
Al (acid) |
Nb |
|
0.18 |
0.90-1.60 |
0.50 |
0.035 |
0.035 |
≥ 0.015 |
0.02-0.05 |
|
Ti |
V |
Ni |
Cu |
Cr |
Mo |
|
|
0.02 |
0.03--0.10 |
0.40 |
0.35 |
0.20 |
0.08 |
|
Mechanical properties for Shipbuilding steel plate A131 Grade AH36:
|
Yield strength (Mpa) |
Tensile strength (Mpa) |
Steel Mark |
|
355 |
490-620 |
A131/AH36 |