Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
ASME SA517 Grade H,SA517GrH steel plate
Source:Xin Steel Industry Date:2013/11/01
Pressure vessel steel plate SA517 Grade H is under steel standard specification for high yield strength ASME SA 517/SA 517M.A517GrH is alloy steel plate with quenching and tempering heat treatment when rolling.SA517 Grade H is a high strength steel plate with the minimum yield strength at 690Mpa for the thickness equal or belows 65mm,and 620 Mpa for the thickness above 65mm,the tensile strength shall be within 795-930 Mpa. The manufacturer may reheat-treat plates that fail to meet the mechanical property requirements of this specification when rolling of high tension steel plate SA517GrH.All mechanical property tests shall be repeated whenmaterial is resubmitted for inspection.
Get an valued quotation for SA517 Grade H High Strength steel plate,NOW CONTACT XINSTEEL.
Other relative high strength steel grades including EN 10025-6 S460Q high strength steel plate,S460QL Quenched steel plate,S460QL1 steel plate,S500Q hot rolled steel plate,S500QL structural steel plate,S500QL1 high strength steel plate,S550Q plate steel,S550QL structural steel plate,S550QL1 quenched steel plate,S620Q steel plate,S620QL high strength steel plate,S620QL1 plate steel,S690Q steel plate,S690QL structural steel sheet,S690QL1 steel plate,S890Q plate steel,S890QL steel sheet,S890QL1 hot rolled plate,S960Q high strength steel plate,S960QL high strength plate steel.
Chemical composition of Heat analysis for SA517 Grade H quenched and tempered steel plate (Max %)
|
Steel Grade |
The Main Elements in rolling SA517Gr.H pressure vessel steel plate | ||||||
|
C |
Si |
Mn |
P |
S |
Ni |
B | |
|
SA517GrH |
0.12-0.21 |
0.15-0.35 |
0.95-1.30 |
0.035 |
0.035 |
0.30-0.70 |
0.0005 min |
|
Cr |
Mo |
Cu |
Nb |
Ti |
V |
Zr | |
|
0.40-0.65 |
0.20-0.30 |
- |
- |
- |
0.03-0.08 |
- | |