Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
A633 Grade D,A633GrD,A633 Gr.D HSLA steel plate
Source:Xin Steel Industry Date:2013/01/10
High strength low alloy steel plate A633 Grade D provide a minimum yield point of 50ksi [345MPa] in thicknesses up to 2.50 in. [65mm], inclusive and 46ksi [315MPa] in thickness over 2.50 in. to 4.0 in. [65mm to 100mm], inclusive.Steel plate A633GrD shall be done Normalised when rolling,of course,if the end users accepted hot rolled or As rolled for these steel materials A633 Grade D.The requirements for fine austenitic grain size in specification A 6/A 6M shall be met for low alloy steel plate A633GrD.
Get an valued quotation for A633Gr.D Low alloy steel plate,NOW CONTACT XINSTEEL.
Other relative low alloy steel grades under steel standard ASTM and ASME are S/A572 Grade 42 steel plate,S/A572 Grade 50 low alloy steel plate,S/A572 Grade 60 steel plate,S/A572 Grade 65 low alloy plate,S/A633 Grade A steel plate,S/A633 Grade C low alloy steel plate,S/A633 Grade D steel plate,S/A633 Grade E alloy steel plate,S/A709 Grade 36 steel plate,S/A709 Grade 50 low alloy steel plate,S/A709 Grade 50W weathering steel plate,S/A709 Grade HPS 50W low alloy steel plate,S/A709 Grade HPS 70W steel plate.En10025 low alloy steel plate s275jr,steel plate s275j0,steel plate s275j2,s355jr+n steel plate,s355j0 steel plate,s355j2 steel plate.
Chemical composition of Product analysis for A633 Grade D low alloy steel plate (Max %)
|
Steel Grade |
The Main Elements in rolling A633 Gr.D steel plates | ||||
|
C |
Si |
Mn |
P |
S | |
|
A633 Gr.D |
0.20 |
0.15-0.50 |
0.70-1.35 |
0.035 |
0.04 |
|
Cr |
Cu |
Mo |
Ni |
| |
|
0.25 |
0.35 |
0.08 |
0.25 |
| |