Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
S275JR angel bar and A36 angle steel stock in China
Source:Xin Steel Industry Date:2021/07/12
S275JR angle bar comes from European specification EN 10025-2 without low temperature impacting test.A36 angle steel is from ASTM A36/A36M specification with minimum yield strength 250 Mpa for all thickness.S275JR angle bar owns a higher yield strength requirements than A36 angle bar.
Xinsteel Industrial owned 7 warehouses for steel materials including steel plates,steel pipes,steel beams,angle bars,stainless steel pipe,stainless steel plate,stainless steel angles with mill original quality certificates.8×75×75MM A36 equal angle bar,8×75×100MM S275JR uneuqal angle bar stock in our warehouse with various lengths.Shot blasting and painting,bundled and packing with angle bars would be done in one stop in our warehouses.
EN 10025-2 S275JR angle bar and ASTM A36 angle bar in chemical composition and mechanical property:
|
S275JR vs A36 |
Chemical composition: Heat Analysis Max% | |||||||
|
Standard |
Grade |
C |
Mn |
P |
S |
Si |
Cu |
N |
|
EN 10025-2 |
S275JR |
0.21 |
1.50 |
0.035 |
0.035 |
- |
0.55 |
0.012 |
|
ASTM A36/A36M |
A36 |
0.25 |
- |
0.04 |
0.05 |
0.40 |
- |
- |
|
Mechanical Properties: |
Thickness |
Yield strength |
Tensile strength | |||||
|
Mpa Min. |
Mpa | |||||||
|
EN 10025-2 |
S275JR |
T≤16 |
275 |
410-560 | ||||
|
ASTM A36/A36M |
A36 |
All |
250 |
400-550 | ||||