Home > Steel Standards
- High strength steel plate S690QL,Q690E,STRENX 700 E and Weldox 700E
- Comparasion with EN 10025 steel plate S355N and steel plate S355J0
- Comparasion with ASTM A515 and A516 steel plate
- How to choose pipe grades S235 S275 S355 from EN 10210 Specification
- How to choose steel grades from shipbuilding steel plate
- Introduction of Corten steel plate in different specifications
ABS Grade AH40,ABS Grade AH40 ship plate,ABS Grade AH40 shipbuilding plate
Source:Xin Steel Industry Date:2012/07/24
Shipyards use shipbuilding steel plate ABS Grade AH40 to construct tanks and vessels in ships cause ABS Grade AH40 ship plate owned the higher yield strength and tensile strength. Xinsteel group owned tens of stock warehouses in port cities in China,there are thousands tons of shipbuilding steel plate and sheet and angles and buld flats in stock which are ready to ship on board.Different thicknesses,width mainly in 2000-2500mm,length mainly in 6000-12000mm for steel plate ABS Grade AH40.
Our normal rolling period for ship plate ABS Grade AH40 shall be about 15 days for hundreds tons,and then ABS agency would come to our mill for sample inspection before shipment,and finally our mill issue the mill test certificates for each plate and ABS agency stamped and endorsed on our Mill test certificates.So this systerm can gurantee all our plates are properity and quality.Else,our mill had cooperated with other eight classification societies,such as LR,GL,BV,DNV,NK,CCS,RINA,KR.
Chemical composition of Heat analysis for Shipbuilding steel plate ABS Grade AH40 (Max %):
|
C |
Mn |
Si |
P |
S |
Al (acid) |
Nb |
|
0.18 |
0.90-1.60 |
0.50 |
0.035 |
0.035 |
≥ 0.015 |
0.02-0.05 |
|
Ti |
V |
Ni |
Cu |
Cr |
Mo |
|
|
0.02 |
0.03--0.10 |
0.40 |
0.35 |
0.20 |
0.08 |
|
Mechanical properties for Shipbuilding steel plate ABS Grade AH40:
|
Yield strength (Mpa) |
Tensile strength (Mpa) |
Steel Mark |
|
390 |
510-650 |
AB/AH40 |